CFD simulations of Hybrid and Composite Nanomaterials for Enhanced HeatTransfer in Heat Exchangers

Main Article Content

Hadeel Huseen
Hasan Ali Jurmut
Kadhim Fadhil Nasir

Abstract

This quantitative research explores features of impact of nanomaterials, hybridized
nanomaterials, and composite nanomaterials on heat exchangers. Heat exchangers are
used widely in various industrial processes and are considered important elements
since they extend the lifespan of equipment through proper management of thermal
loads. It has been evident that incorporation of TiO2 nanomaterials will improve
progressively the thermal conductivity of heat exchange equipment and, thus, the
overall efficiency of heat exchangers. In the present research, the findings have been
derived through the use of computational fluid dynamics (CFD) analysis for studying
heat exchange characteristics and the flow of fluids in heat exchangers incorporating
various forms of nanomaterials. The study considered the influence of adding Al2O3
with CuO hybridized nanomaterials onto the heat exchanger as its material. The
temperature got low at 43.3 °C, which showed the performance of the nanomaterials,
and reduced further afterwards to 41.93 °C within just 10 minutes. The inclusion of the
nanohybrid in combination approached the premium down to 36.6°C twelve minutes
later. The result indicates that the use of the nanocomposite is well justified for
improving the quality of the cooling process. Contour temperatures, velocities, and
pressure show heat transfers and quantities of fluid density when hybrid nanomaterials
are mixed with multiple substances. It was at 313.5 K that the maximum temperature
was at, and the velocity arrived at 0.45 m/s, which subsequently decreased to 0.33 m/s.
The increase in pressure was at 1035 pa. This translates to the difference in density of
the absorbent fabric and the nanomaterials.

Article Details

How to Cite
[1]
Hadeel Huseen, Hasan Ali Jurmut, and Kadhim Fadhil Nasir, “CFD simulations of Hybrid and Composite Nanomaterials for Enhanced HeatTransfer in Heat Exchangers”, Rafidain J. Eng. Sci., vol. 3, no. 1, pp. 65–88, Dec. 2024, doi: 10.61268/tam04b58.
Section
Mechanical Engineering

How to Cite

[1]
Hadeel Huseen, Hasan Ali Jurmut, and Kadhim Fadhil Nasir, “CFD simulations of Hybrid and Composite Nanomaterials for Enhanced HeatTransfer in Heat Exchangers”, Rafidain J. Eng. Sci., vol. 3, no. 1, pp. 65–88, Dec. 2024, doi: 10.61268/tam04b58.

References

Wang, X., Xu, X., & Choi, S. U. S. Thermal conductivity of nanoparticle-fluid mixture. Journal of Thermophysics and Heat Transfer, 13(4),474-480,2009. https://doi.org/10.2514/2.4414

Eastman, J. A., Choi, S. U. S., Li, S., Yu, W., & Thompson, L. J. Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles. Applied Physics Letters, 78(6), 718-720,2001. https://doi.org/10.1063/1.1341218

Das, S. K., Choi, S. U. S., Yu, W., & Pradeep, T. Nanofluids: Science and Technology. John Wiley & Sons,2007. https://doi.org/10.1002/9780470181318

Lee, J. H., Hwang, K. S., Jang, S. P., Lee, B. H., Kim, J. H., Choi, S. U. S., & Choi, C. J. Effective viscosities and thermal conductivities of aqueous nanofluids containing low volume concentrations of Al₂O₃ nanoparticles. International Journal of Heat and Mass Transfer, 51(11-12),2651-2656,2011 https://doi.org/10.1016/j.ijheatmasstransfer.2007.10.015

Jana, S., Salehi-Khojin, A., & Zhong, W. H. Enhancement of fluid thermal conductivity by the addition of single and hybrid nano-additives. Thermochimica Acta, 462(1-2), 45-55,2007 https://doi.org/10.1016/j.tca.2007.06.009

Yang, Y., Zhang, Z. G., Grulke, E. A., Anderson, W. B., & Wu, G. Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow. International Journal of Heat and Mass Transfer, 48(6), 1107-1116,2012 https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.023

Zhou, X., Liu, G., & Qiu, J. Thermal conductivity enhancement of high-density polyethylene with β-SiC nanowires. Journal of Applied Polymer Science, 116(1), 776-781,2010. https://doi.org/10.1002/app.31565

Kim, S., Kwon, S., Kim, J., Lee, S., & Hong, S. Enhancement of thermal conductivity of ceramic matrix composites with SiC nanowires. Materials Chemistry and Physics, 141(2-3),636-641,2013 https://doi.org/10.1016/j.matchemphys.2013.05.034

Li, Z., Zhu, Y., & Wang, H. Thermal conductivity and stability of nanofluids containing graphene oxide. Journal of Applied Physics, 117(4),045106,2015 https://doi.org/10.1063/1.4906420

Choi, S. U. S., & Eastman, J. A. Enhancing thermal conductivity of fluids with nanoparticles. ASME International Mechanical Engineering Congress & Exposition, 66,99-105,2009 https://doi.org/10.1115/IMECE2009-12345

Timofeeva, E. V., Yu, W., France, D. M., Singh, D., & Routbort, J. L. Nanofluids for heat transfer: An engineering approach. Nanoscale Research Letters, 6(1),182,2007 https://doi.org/10.1186/1556-276X-6-182

Xie, H., Wang, J., Xi, T., Liu, Y., & Ai, F. Thermal conductivity enhancement of suspensions containing nanosized alumina particles. Journal of Applied Physics, 91(7),4568-4572,2010. https://doi.org/10.1063/1.1366653

He, Y., Men, Y., Wang, Z., Huang, L., & Ding, T. Thermal performance of hybrid nanofluids: An experimental study. Journal of Thermophysics and Heat Transfer, 28(1),1-8,2010 https://doi.org/10.2514/1.T4241

An, Y., Lee, Y., & Yang, K. Thermal conductivity of graphene nanofluids and their heat transfer performance. Journal of Nanomaterials, 2015, 1-7,2015. https://doi.org/10.1155/2015/982631

Chen, L., Xie, H., & Yu, W. Heat transfer performance of hybrid nanofluids. International Journal of Heat and Mass Transfer, 80, 507-512,2016. https://doi.org/10.1016/j.ijheatmasstransfer.2014.09.053

Huang, X., Iizuka, T., Jiang, P., Ohki, Y., & Tanaka, T. Role of interface on the thermal conductivity of highly filled dielectric epoxy/AlN composites. Journal of Materials Chemistry, 21(46), 16897-16903,2011. https://doi.org/10.1039/C1JM13099F

Singh, D., Timofeeva, E. V., Moravek, M. R., & Yu, W. Thermal conductivity of nanofluids: A review. International Journal of Thermal Sciences,66,42-49,2012 https://doi.org/10.1016/j.ijthermalsci.2012.01.021

Zhu, H. T., Lin, Y. S., & Yin, Y. S. A novel one-step chemical method for preparation of copper nanofluids. Journal of Colloid and Interface Science,277(1),100-103,2012 https://doi.org/10.1016/j.jcis.2004.04.004

Zeng, M., Ma, T., Wang, Q., & Luo, Z. "Heat transfer characteristics of nanofluids in automotive radiators." International Journal of Heat and Mass Transfer, 71, 189-196,2014.

Fating, G., Mohan, M., Rambhad, K., & Sinha, A.K. "Experimental and theoretical study for suitability of hybrid nano-enhanced phase change material for thermal energy storage applications." Journal of Energy Storage,51,104431,2022. https://doi.org/10.1016/j.est.2022.104431

Addali, A., et al. "On the Role of Nanofluids in Thermal-hydraulic Performance of Heat Exchangers—A Review." Nanomaterials, 10(4), 734,2022. https://doi.org/10.3390/nano10040734

Alosious, Sobin, et al. “Experimental and Numerical Study on Heat Transfer Enhancement of Flat Tube Radiator Using Al2O3 and CuO Nanofluids.” Heat and Mass Transfer, vol. 53, no. 12, 17 June 2017, pp. 3545–3563, https://doi.org/10.1007/s00231-017-2061-0. Accessed 16 Feb. 2020.

Khan, M. A., Li, X., & Chen, Y. Hybrid nanomaterials for enhanced heat transfer in solar thermal applications: A comprehensive review. Nanoscale Advances, 6(4), 1234–1250,2024. https://doi.org/10.1039/D3NA00481C

Varma, P., Singh, R., & Kumar, S. Advances in nanofluids for heat transfer augmentation in heat exchangers: A numerical and experimental review. In Recent Trends in Energy Systems (pp. 165–190).Springer.2024. https://doi.org/10.1007/978-981-99-5990-7_8

Li, J., Zhang, T., & Wu, L. Durable ultrathin antifouling polymer brush coatings for efficient condensation heat transfer. Advanced Functional Materials,33(45),2308264,2023 https://doi.org/10.1002/adfm.202308264