A Review of the Effect of Crumb Rubber as an Additive on Hot Mix Asphalt
Article Sidebar
Main Article Content
Abstract
Materials recycling has a significant economic and environmental impact; as a result, steel, aluminium, plastic, and other recyclable materials have been pushed for use in construction materials. One of these recyclable materials is the crumb rubber, has been considered as a pavement component. The general behaviour of the composite rubber-hot mix asphalt system would be varied from that of the conventional rubber free mix. In this review, desirable characteristics of hot mix asphalt are highlighted first. Also, effect of gradation and the main types of rubber are specified. Afterward, many studies that considered the crumb rubber as a waste product and its associated mixture and modifiers are reviewed. The factors affect the crumb rubber modifier studied by many investigators are summarized. Findings show an increase in pavement performance after treating with crumb rubber. In addition, crumb rubber modifier meets the local and international standards requirements.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Licensed under a CC-BY license: https://creativecommons.org/licenses/by-nc-sa/4.0/
How to Cite
References
D. L. Presti, “Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review”. Construction and building materials, 49, 863-881, (2013).
M. M. Rahman, G. D. Airey, & A. C. Collop, “Moisture susceptibility of high and low compaction dry process crumb rubber–modified asphalt mixtures”. Transportation research record, 2180(1), 121-129, (2010).
, G. Hicks ,S. Tighe. & D. Cheng “Rubber Modified Asphalt Technical Manual”.Prepared for the Ontario Tire Stewardship Toronto, Canada, (2012).
J. Xie , Y. Yang, S. Lv, Y. Zhang, X. Zhu, & C. Zheng, “Investigation on rheological properties and storage stability of modified asphalt based on the grafting activation of crumb rubber. Polymers, 11(10), 1563, (2019). https://doi.org/10.3390/polym11101563
L. Wang, Y. Xing, & C. Chang, “Microscopic and dynamic rheological characteristics of crumb rubber modified asphalt”. Journal of Wuhan University of Technology-Mater Sci Ed, 25(6), 1022-1026, (2010). https://doi.org/10.1007/s11595-010-0142-8
F. Romadhon, A. I. Candra, D. A., Karisma, M. H. Nastotok, R. K., Dewanta, & H. Wicaksono, “Increasing the stability of asphalt concrete mixture using crumb rubber”. E3S Web of Conferences, 328, 10002, (2021). https://doi.org/10.1051/e3sconf/202132810002
F. Yang, Z. Hu & H. Xi, “Comparative investigation on the properties and molecular mechanisms of natural phenolic compounds and rubber polymers to inhibit oxidative aging of asphalt binders”. Advances in Materials Science and Engineering, 2022, 1-14. https://doi.org/10.1155/2022/5700516
A. N. A. Qadi, M. B. Alhasanat, & M. Haddad, “Effect of crumb rubber as coarse and fine aggregates on the properties of asphalt concrete”. American Journal of Engineering and Applied Sciences, 9(3), 558-564 , (2016). https://doi.org/10.3844/ajeassp.2016.558.564
T. Wang, F. Xiao, X. Zhu, B. Huang, J. Wang, & S. Amirkhanian, “Energy consumption and environmental impact of rubberized asphalt pavement”. Journal of Cleaner Production, 180, 139-158, (2018). https://doi.org/10.1016/j.jclepro.2018.01.086
A manual for design of hot mix asphalt with commentary”. (2011). Washington, D.C.: Transportation Research Board.
H. Chen, Q. Xu, S. Chen & Z. Zhang, “Evaluation and design of fiber reinforced asphalt mixtures”. Materials & Design, 30(7), 2595-2603, (2009).
K. W. Lee & K. Mahboub, “Asphalt mix design and construction: past, present, and future”. Reston, VA: American Society of Civil Engineers, (2006).
N. A. Hassan, G. D. Airey, R. P. Jaya, N. Mashros & M. M. A. Aziz, “A review of crumb rubber modification in dry mixed rubberised asphalt mixtures”. Jurnal Teknologi, 70(4, 2014).
F. Xiao, B. J. Putman & S. N. Amirkhanian, “Laboratory investigation of dimensional changes of crumb rubber reacting with asphalt binder”. In Proceeding asphalt rubber 2006 conference (Vol. 82, No. 76.4, p. 71), (2006).
J. Gallego, M. A. Del Val & R. Tomas, “Spanish experience with asphalt pavements modified with tire rubber”. Asphalt Rubber, 2000.
J. B. Sousa & S. L. Weissman, “Modeling permanent deformation of asphalt-aggregate mixes”. Journal of Association of Asphalt Paving Technologist , 63, 224- 257, (1994).
Y. Becker , M.P. Mendez & Y. Rodriguez, “Polymer modified asphalt”. Vision Tecnologica, 9(1), 39-50, (2001).
Guide, Asphalt Rubber Usage. "Caltrans." State of California Department of Transportation: Sacramento”, CA, USA (2003): 94612-95819.
H. B. Takallou, & M. B. Takallou, “Effects of mixing time and temperature on the visco-elastic properties of asphalt rubber binder”. Asphalt rubber, 589-602, (2003).
T.C. Billiter, J.S. Chun, R.R. Davison, C.J. Glover, & J.A. Bullin, “Investigation of the curing variables of asphalt-rubber binder”. Petroleum Science and Technology, 15 (5- 6), 445-469, (1997).
S. A. Dantas Neto, “Evaluation of the properties of binders and mixes modified with crumb rubber from used tires. PhD Thesis, Department of Civil and Environmental Engineering, University of Brasilia, Brazil, (2004).
J. A. Epps, “ Uses of recycled rubber tires in highways ” (Vol. 198). Transportation Research Boardو(1994).
D. C. Thompson & A. J. Hoiberg, “Bituminous materials: asphalt tars and pitches”. New York, (1979).
U. Isacsson, & X. Lu, “Characterization of bitumens modified with SEBS, EVA and EBA polymers”. Journal of Materials Science, 34(15), 3737- 3745,V
Y. Yildrim, “Polymer modified asphalt binder”. Journal of Building and Construction Materials, 21, 66-72و(2007).
D.I. Hanson, K. Y. Foo, E. R. Brown & R. Denson, “Evaluation and characterization of a rubber-modified hot mix asphalt pavement”. Transportation Research Record: Journal of Transportation Research Board, 1436, 98-107و(1994).
P. Cong, P. Xun, M. Xing, S. Chen.. “Investigation of asphalt binder containing various crumb rubbers and asphalts”. Constr. Build. Mater. 40:632, 2013
J. Yin, S. Wang, Lv. Fan Ren., “Improving the Short-Term Aging Resistance of Asphalt by Addition of Crumb Rubber Radiated by Microwave and Impregnated Inepoxidized Soybean Oil”. Constr. Build. Mater. 49: 712, 2013.
H. Wang, Z. Dang, L. Li, Z. You. “Analysis on Fatigue Crack Growth Laws for Crumb Rubber Modified (CRM) Asphalt Mixture”. Constr. Build. Mater. 47: 1342, 2013.
J.E. Huffman, “Sahuaro Concept of Asphalt-Rubber Binders”. Presentation at the First Asphalt Rubber User Producer Workshop, Arizona, (1980).
B. Brule, “Polymer-modified asphalt contents used in the road construction industry: Basic principles”. Transportation Research Record: Journal of Transportation Research Board,1535, 48-53, (1996).
D. R. Brown, D. Jared, C. Jones & D. Watson, “Georgia’s experience with crumb rubber in hot – mix asphalt”. Transportation Research Record: Journal of Transportation Research Board. 1583, 45-51, (1997).
G.W. Maupin Jr, “Hot mix asphalt rubber applications in Virginia”. Transportation Research Record: Journal of Transportation Research Board, 1530, 18-24, (1996).
E. Charania, J. O. Cano & R. H. Schnormeier, “Twenty- year study of asphalt rubber pavement in Phoenix, Arizona”. Transportation Research Record: Journal of Transportation Research Board ,1307, 29-38, (1991).
N. Tuntiworawit, D. Lavansiri & C. Phromsorn, “The modification of asphalt with natural rubber latex”. The 6th International Conference of Eastern Asia Society for Transportation Studies, Thailan, (2005).
Rubber Classification, Natural Rubber, Synthetic Rubber – Transtutors (2017) Transtutors.com. Retrieved 29 April 2017 from http://www.transtutors.com/chemistry-homework-help/polymers/rubber
Y. Huang, R.N. Bird, O. Heidrich, “A review of the use of recycled solid waste materials in asphalt pavements”. Resources, Conservation and Recycling ,52 , 58 –73, (2007).
G.D. Airey, , M.M. Rahman &, A.C. Collop ,“Absorption of bitumen into crumb rubber using the basket drainage method”. International Journal of Pavement Engineering, 4(2), 105-119, (2003).
K.D. Jeong, S.-J. Lee, S. N. Amirkhanian & K. W. Kim, “Interaction effect of crumb rubber modified asphalt binder”. Construction and Building Materials, 24, 824-831, (2010).
S. K. Palit, R. K. Sudhakar & B. B. Pandey, “Laboratory evaluation of crumb rubber modified asphalt mixes”. Journal of Materials in Civil Engineering, 16(1), 45-53, (2004).
H. Zhu, & D. Carlson, “A spray based crumb rubber technology in highway noise reduction application”. Journal of Solid Waste Management , 27(1), 27-33, (2001).
B. Huang, L. N. Mohammad, P. Graves, S. C. Abadie “Louisiana Experience with Crumb Rubber-Modified Hot-Mix Asphalt Pavement”. J.Transport Res Board. 1789: 1, 2002.
C. Thodesen, K. Shatanawi & S. Amirkhanian, “Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity”. Construction and Building Materials, 23(1), 295-303, (2009).
S. J. Lee, C. K. Akisetty & S. N. Amirkhanian, “ The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements”. Construction and Building Materials, 22(7), 1368-1376, (2023).
A. T. Mohammad, Alsheyab, Taisir Khedaywi •, Omar Ogiliat. “Effect of Waste Tire Rubber on Properties of Asphalt Cement and Asphalt Concrete Mixtures: State of the Art”. International Journal of Pavement Research and Technology, https://doi.org/10.1007/s42947-023-00361-4
L. Wang, L. Zhang & Y. Liu, “Molecular dynamics study on the effect of mineral composition on the interface interaction between rubberized asphalt and aggregate”. Journal of Materials in Civil Engineering, 34(4), 4022032, (2022).
F. J. López-Moro, M. C. Moro, F. Hernández-Olivares, B. Witoszek- Schultz & M. Alonso-Fernández, “Microscopic analysis of the interaction between crumb rubber and bitumen in asphalt mixtures using the dry process”. Construction and Building Materials, 48, 691–699, (2013). https:// doi. org/ 10. 1016/j. conbu ildmat. 2013. 07. 041.
M. Bekhiti, H. Trouzine & A. Asroun, “Properties of waste tire rubber powder. Engineering”, Technology & Applied Science Research, 4(4), 669–672. https://doi.org/10. 48084/ etasr.439
, (2014).
N. S. Mashaan, A. H. Ali, M. R. Karim & M. Abdelaziz, “An overview of crumb rubber modified asphalt”. International Journal of Physical Sciences, 7(2), 166–170, (2012).
L. Raad & S. Saboundjian, “Fatigue behavior of rubber – modified pavements”. Transportation Research Record. Journal of Transportation Research Board ,1639,73-82, (1998).
H. R. Soleymani, H. Zhai, and H. Bahia, “Role of modified binders in rheology and damage resistance behavior of asphalt mixture”. Transportation Research Record: Transportation Research Board, 1875, 70- 79 , (2004).
R.B. McGennis, “Evaluation of physical properties of fine crumb rubber – modified asphalt binder”. Transportation Research Record :Journal of Transportation Research Board, 1488, 62-71, (1995).
T.C. Billiter, R. R. Davison, C. J. Glover and J. A. Bullin, “Physical properties of asphalt -rubber binder”. Petroleum Science and Technology, 15(3-4), 205- 236, (1997a).
F.K. M. Hamed, “Evaluation of fatigue resistance for modified asphalt concrete mixture based on dissipate energy concept”. Phd. Thesis , Technische University Darmstadt, Germany, (2010).
J. B. Sousa & S. L. Weissman, “Modeling permanent deformation of asphaltaggregate mixes”. Journal of Association of Asphalt Paving Technologist , 63, 224- 257, (1994).
E. R. Brown & S. A. Cross, “A National Study of Rutting in Asphalt Pavement”. Journal of the Association of Asphalt Paving Technologists, 61,535-583, (1992).
A. Mahrez, “Properties of rubberised bitumen binder and its effect on the bituminous mix”. MSc. Dissertation, Faculty of Engineering, University of Malaya, Malaysia, (1999).
H. U. Bahia & R. Davies, “Effect of crumb rubber modifiers (CRM) on performance related properties of asphalt binder Asphalt Paving Technology”, 63, 414, (1994).
T. S. Khedaywi, A. Rahman Tamimi, H. R. Al-Masaeid ., & K. Khamaiseh, “Laboratory investigation of properties of asphalt-rubber concrete mixtures”. Transportation Research Record, 1417, 93–98, (1993).
Y. Issa, “Effect of adding waste tires rubber to asphalt mix”. International Journal of Innovative Science and Research Technology, 3(5), 61–68, (2016).
Wulandari, P. S., & Tjandra, D. (2017). Use of crumb rubber as an additive in asphalt concrete mixture. Procedia Engineering, 171,1384–1389. https://doi.org/10. 1016/j. proeng. 2017. 01. 451
B. Yigezu Tefera, “Evaluation of the effect of rubber modified bitumen on asphalt performance”. American Journal of Civil Engineering, 6(3), 87, (2018). https:// doi. org/ 10. 11648/j. ajce. 20180 603.11.
A. H. Al-Rubaie & H. H. Joni, “Assessment the performance of asphalt mixtures modified with waste tire rubber at high temperatures”. Journal of Physics: Conference Series, (2021). https:// https://doi.org/10. 1088/ 1742- 6596/ 1895/1/ 012026.
H. H. Mohammed, H. H. Joni , “Influence of Waste Rubber Nano-Material Utilization on The Engineering Properties of Asphalt Matri”x, IOP Conf. Series: Earth and Environmental Science 1374 (2024) 012015, ICGE-Iraq & WICES https://doi.org/10.1088/1755-1315/1374/1/012015
S. J. Lee, C. K. Akisetty & S. N. Amirkhanian, “The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements”. Construction and Building Materials, 22(7), 1368-1376, (2008).
Kyu-Dong Jeong, Soon- Jae-Lee , Serji N.Amirhanian &Kwang W.Kim “Intraction effects of crumb rubber modified asphalt binders” . Construction and Building Materials.24,824-831,2010.
E. Santagata, D. Dalmazzo, M., Lanotte, M. Chiara, Z. Barbara, P. Torino, “Relationship between Crumb Rubber Morphology and Asphalt Rubber Viscosity”.
F. Moreno, M. Sol, J. Martín, M. Pérez & M. Rubio, “The effect of crumb rubber modifier on the resistance of asphalt mixes to plastic deformation”. Materials & Design, 47, 274-280, (2013).
A. Jaber, I. Elbalawi, M. Elhayek & R. Qandeel, “Investigation the mechanical properties of concrete mixes using tire rubber as a partial replacement of coarse aggregates”. Faculty of engineering in the Islamic University of Gaza, (2014).
F. Fouz, “ A Study about using rubber in modifying bituminous mixtures in Latakia city”, (2014).
N. S. Mashaan, A. H. Ali, M. R. Karim & M. Abdelaziz, “A review on using crumb rubber in reinforcement of asphalt pavement”. The Scientific World Journal, 2014(1), 214612.
A. S. Eltwati, A. Hossein & D. Nasr, “ Effect of crumb rubber particles on the properties of asphalt”. In ICACE 2019: Selected Articles from the International Conference on Architecture and Civil Engineering (pp. 43-52). Springer Singapore, (2020).
S. Eltwati, Ahmed, Idrees Saad, and Ashraf Elsaiti. "The Effect of Crumb Rubber on Properties of Asphalt Mix by Dry Process." The International Journal of Engineering and Information Technology (Ijeit) 5.1 (2019).
M. Bilema ,M. Aman, N. Hassan , M. Haloul, S. Modibbo, “materialstoday Proceedings”. volume 24.p2387-2391, (2021)
K. Y. H. Al-Soudany, H. H. Mohammed, L. Y. Hussein, and Z. I. Qasim, “ Experimental Study of the Effect of Crumb Rubber on Properties ofAsphalt Mix by Wet Process”. E3S Web of Conferences 427, 03034 (2023) ICGEE 2023 https://doi.org/10.1051/e3sconf/202342703034
M.Stroup-Gardiner, B. Chadbourn & D. E. Newcomb, “Babbitt, Minnesota: case study of pretreated crumb rubber modified asphalt concrete”. Transportation Research Record: Journal of Transportation Research Board, 1530, 34-42, (1996).
S. Liu, W. Cao, J. Fang, &, S. Shang , “Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt”. Construction And Building Materials, 23(7), 2701-2708, (2009).
B. Huang, L. N. Mohammad, P. S. Graves, C. Abadie. Louisiana, “Experience with Crumb Rubber-Modified Hot-Mix Asphalt Pavement”. J.Transport Res Board. 1789: 1.
Proceedings of the 5th Asphalt Rubber International Conference. 513–532 (2012). https://doi.org/10.13140/2.1.1479.5524)