Al-Rafidain Journal of Engineering Sciences Vol.2 Issue. 2 (2023)

Rafidain J. Eng. Sci.  Vol.2 Issue 2 (2024)

DOI: https://doi.org/10.61268/rjes.v2ii

Published: 05-06-2024

Review Articles

fig 1

Improvement The Concrete Fire Resistance by Using By-Product Materials: A Review

Asmaa Mahdi Ali, Shaima Sabri Ali, Abeer Hassan wanas (Author)

22-31

PDF
fig 1

Removal Pharmaceutical Contaminants from Water and Wastewater: a review

Aisha Abd Al-Razaq Taha, Salwa Hadi Ahmed (Author)

53-66

PDF
fig 4

Sustainable Adsorption of Congo Red Dye Using Organic Waste Materials as Green Adsorbents: A Mini-Review

Abdul-Azeez Hatem Mohammed, Haneen Karaghool (Author)

78-86

PDF
fig 15

Effects of Using Longitudinal GFRP Reinforcing Bars on Shear Behaviour of RC Beams: A Review

Abdulrahman A. Ibrahim, Mohammed M. Rasheed (Author)

87-108

PDF
fig 3

Improving The Engineering Properties of Expansive Clayey Soil by Adding Biopolymer: A Review

Sondos Kareem Al-mousawi, Shaimaa Hasan Fadhil (Author)

138-154

PDF
fig 13

Flexural behavior of reinforced bubble arch slabs: A Review

Farah Muhanned, Waleed A. Waryosh (Author)

155-167

PDF
fig 4

Assessment Tools of Sustainable Buildings Projects: A Review

Mohanad Altuma, Dr.Hanadi Abdulridha Lateef, Dr.Ayad Al-Yousuf (Author)

168-184

PDF
fig 2

Zinc oxide nanoparticles: A comprehensive review on its synthesis, anticancer and drug delivery applications

Mohammed Mohammed, Tijjani Adam, Falah H. Ihmedee3, Aeshah M. Mohammed, Saleh A.K.AL_Essa, Bashir O. Betar (Author)

185-202

PDF
fig 1

Advanced manufacturing with machine learning: enhancing predictive maintenance, quality control, and process optimization

Okwuchukwu Innocent Ani (Author)

280-300

PDF
fig 8

The Uses of Lightweight Material in Civil Engineering : A Review

Wurood Jassim Al-jboori, Madhat Shakir Madhat, Asma Mahdi Ali (Author)

300-318

PDF
fig 2

A Comprehensive Review of the Impact of CO2 Emissions on Global Warming and the Potential Using Solar Energy Mitigation

Ahmed A.Ali, Harith N. Mohammed, Safaa M.R. Ahmed (Author)

319-340

PDF
fig 6

Biodegradable Polymers: Environmental Sustainability, Challenges, and Considerations

Hala Ali Meer Hussein, Hussein Khadim, Eman J.Younos (Author)

430-440

PDF
fig 2

Involving the Phase Change Materials for Passive Cooling Applications in Photovoltaics: Review

Dalmn Y. Taha, Tawfeeq W. Mohammed, Ibrahim A. Atiyah (Author)

511-524

PDF
fig 2

Shear Strength Behaviour of Unsaturated Soils: A Review

Baidaa Ahmed Abdullah, Yasir Mawla Al-Badran (Author)

536-546

PDF
fig 3

A Review of the Effect of Crumb Rubber as an Additive on Hot Mix Asphalt

Fatin Hadi Meqtoof1, Ishraq Hameed Naser, Nesreen Kurdy Al-Obaidy, Assel Qaddoori Makhool (Author)

547-563

PDF

Mechanical Engineering

fig 5

Fatigue Analysis of Prosthetic Osseointegration with a Novel Protection System

Shaymaa Shiab Hammoody (Author)

16-21

PDF
fig 2

Numerical Analysis of Heat Transfer Enhancement Using Water / FMWCNT Nanofluid Passed in a 2D Backward Facing Step Channel

Sarmad A. Ali (Author)

203-209

PDF
fig 9

Oscillating Heat Pipe Start-up and Flow Characteristics with Water as Working Fluid

Mohammed Haider Taher, Dr. Wail S. Wadee (Author)

262-279

PDF
fig 2

Numerical study of a hybrid system of solar panels, a diesel generator, and a wind turbine using a battery system

Hussein Jassim Akeiber (Author)

339-361

PDF
fig 3

Numerical Investigation of Effect Partially Corrugated Heated Wall on Behaviour Natural Convection Heat Transfer in A Square Enclosure

Sarmad A. Ali, Ali Baqer hussein (Author)

374-382

PDF
fig 8

Numerical and Design Study of Beehive in Building for Thermal Storage During Hours of Absence of Solar Radiation

Hussein Jassim Akeiber (Author)

458-470

PDF
fig 5

Numerical Investigation of Advanced Composite Materials for Enhanced Structural Performance and Aerodynamic Efficiency of UAV Wings

Adian Waleed Ismail, Yaser Alaiwi (Author)

471-494

PDF

Electrical Engineering

fig 7

Hybrid PV-Battery System Evaluation in Baghdad: ICOE and NPV Analysis using SAM Software

AHMAD IMAD AL-SARRAJ (Author)

1-7

PDF

Civil Engineering

fig 16

RC flat slab with opening strengthened embedded bearing plate under Punching shear

Lateef Saber Lateef , Saad Khalaf Mohaisen (Author)

8-15

PDF
fig 3

Experimental investigation of External FRP strengthening column against secondary moment of slender effect

Ola Ahmed Hussein, Nibras Nizar Khalid (Author)

43-52

PDF
fig 17

Properties of Engineered Cementations Composite Concrete (Bendable Concrete)

Tabark M.Shaker, Wissam Al-Saraj , LUMA A. ZGHAIR1 (Author)

109-128

PDF
fig 6

Shear Behaviour in Reinforced Concrete Beams: Mechanisms, Failure Modes, and Predictive Models: A Review

Muhammed Jasim Awad , Mohammed M. Rasheed (Author)

210-227

PDF
fig 4

Choosing the Best Sustainable Prefabricated Building Systems Using the Analytical Network Process (ANP) Technique

Mohammed Saleh Khalaf, Maysoon Abdullah Mansor (Author)

228-248

PDF
table 1

Punching shear behavior for flat slabs with CFRP and openings

Zahraa Maitham, Dr.Ali sabah (Author)

362-373

PDF
fig 12

Numerical Study on the Shear Capacity-Curvature Ductility Relationship of High Strength Reinforced Concrete Beams under Different Failure Modes Using ABAQUS

Hussein A. Merie, Mazin B. Abdulrahman (Author)

413-429

PDF
fig 5

White Cement Concrete as an Element Sustainable Construction

Rafal Salih, Husain Khalaf Jarallah, Mohammed Mosleh Salman (Author)

441-457

PDF
fig 3

Behavior of Concrete Beam Encasing Castellated Steel Section with Different Opening Size

Mohammed Abdalkareem Qasim, Waleed A.Waryosh (Author)

502-510

PDF
fig 5

Effect of Stirrups Shaped on Shear Capacity of Self-Compacting Concrete Beams Provided by External Steel Plate  

Douaa Kasim, Wissam Kadhim AlSaraj (Author)

525-535

PDF

Chemical Engineering

fig 7

Thermal Effects on Kinetics and Catalytic Efficiency of LaNiMnO3 in Methane Dry Reforming

Halah A. Ramadhan, Maha Al-Ali (Author)

403-412

PDF

Computer Engineering

fig 2

The Influence of AI-Driven Personalization on Consumer Decision-Making in E-Commerce Platforms

Shaymaa Kadhim Mohsin (Author)

249-261

PDF

Materials Engineering

fig 7

Electrophoretic Deposition of Barium Titanate Nanopowder Coatings for Corrosive Protection of Carbon Steel

Rana S. Abdullah, Lubna Ghalib, Yasir K. Ibrahim (Author)

32-42

PDF
fig 5

Effect of Doped Aluminium into Bismuth Telluride on the Structural and Optical Properties by Thermal Evaporation

Samar Saad Fazaa, Firas A. Najim (Author)

129-137

PDF

Environmental Engineering

fig 7

Comparative Removal of Crystal Violet Dye Using Peanut Hull Powder and Its Modified Forms: Adsorption Mechanisms, Isotherms, and Kinetics

Ban H. Mshhain, Haneen Karaghool, Nizar N. Ismaeal (Author)

67-77

PDF
fig 2

Influence of Environmental Conditions on Bacterial Remediation of Oil-Contaminated Soil: A Case Study at Baiji Refinery

Rand Ahmed, Ahmed A.Al-Obaidi, Zainab Bahaa Mohammed (Author)

383-391

PDF
fig 2

Remediation of Chromium-Contaminated Soils by Electro-Kinetic Technique

Stella Robert, Khitam Abdulhussein Saeed, Laith Hamdan Hawal (Author)

392-402

PDF
fig 3

Isolation and identification of the dominant bacteria from the soil contaminated with hydrocarbon

Nahla Shadeed Ajeel (Author)

495-501

PDF