Al-Rafidain Journal of Engineering Sciences Vol.3 Issue. 1 (2025)

Rafidain J. Eng. Sci. Vol. 3 Issue 1 (2025)

DOI: https://doi.org/10.61268/rjes.v3i

Published: 29-11-2024

Review Articles

table 1

Incorporating Latent Variables into Active Transportation Mode Choice: A review

Abeer Khudhur Jameel, Azaldeen Ali Abdulhussein (Author)

1-18

PDF
fig 1

Literature Review on the Use of Basalt Fiber Sheets for Improving Shear Resistance in High-Strength Concrete Beams

Muhaned Dawood Kashash, Nibras Nizar Khalid (Author)

19-41

PDF

The Behavior of Punching Shear Strength on Geo-Polymer Concrete Circular Slabs with Openings: A Review

Haider Raad Ali, Ali Sabah (Author)

42-64

PDF
fig 9

Shear strengthened of R.C hollow deep beams with large opening by plates: A Review

Abdulrahman Falih Hasan, Ali Sabah Al Amli (Author)

89-112

PDF
fig 3

Challenges, New Approaches, and Potential Future Paths for Three-Dimensional Printing (3DP) in Building Project: A Reviews

Mohammed Abdul-Kareem Malallah (Author)

113-128

PDF
fig 2

Decentralized Solar Cooling Systems for Urban and Rural Applications: A Comparative Analysis

Lina Jassim, H. S. Mohaisen , Faez Abid Muslim Abd Ali, Hasan Shakir Majdi (Author)

129-146

PDF
fig 3

The Impact of Climatic Variations on Thermodynamic Performance of Atmospheric Water Harvesting in Iraq

Faeza Mahdi Hadi, Reyadh Ch. Al-Zuhairy, Hasan Shakir Majdi (Author)

147-166

PDF
fig 1

Solar Adsorption Cooling: Innovations in Adsorbent Materials and Cycle Design

Faeza Mahdi Hadi, Reyadh Ch. Al-Zuhairy, Hasan Shakir Majdi (Author)

167-190

PDF
fig 2

Photovoltaic-Driven Cooling Systems: Advances, Challenges, and Future Directions

Lina Jassim, Hayder Mohammed Mnati, Faez Abid Muslim Abd Ali, Hasan Shakir Majdi (Author)

191-209

PDF
fig 2

A Review on the Use of Vortex Generators in Solar Air Heaters: Experimental Insights and Theoretical Models for Performance Improvement

Jinan Mahdi Hadi, Yasameen Hameed Abed (Author)

210-227

PDF
FIG 4

Functional and Durability Properties of Open-Graded Asphalt Mixtures: AReview

Shams Ali Ahmed, Sady A. Tayh, Nidaa Adil Jasim (Author)

228-242

PDF
fig 2

Emerging artificial intelligence methods in civil engineering: A Comprehensive Review

Mohammed Mohammed, Aeshah M. Mohammed, Jawad K. Oleiwi, Falah H. Ihmedee, Tijjani Adam, Bashir O. Betar, Subash C. B. Gopinath (Author)

280-293

PDF
fig 1

The Evolution of Social Engineering Attacks: A Cybersecurity Engineering Perspective

Hussein Jassim Akeiber (Author)

294-316

PDF
fig 12

Artificial Intelligence in Engineering Management: Revolutionizing Decision-Making and Automation

Hussein Jassim Akeiber (Author)

317-349

PDF
fig 1

Influence of Fiber Treatments on Water Absorption Behavior in Natural Fiber-Reinforced Polymer Composites: A Review

Mohammed Mohammed, Aeshah M. Mohammed, Jawad K. Oleiwi, Tijjani Adam5, Bashir O. Betar, Subash C. B. Gopinath, Falah H. Ihmedee, Kuzmin Anton (Author)

410-430

PDF
fig 5

Importance of Artificial Intelligence in the Engineering Applications: A Review

Samir Ali Amin, Ahmed Sady Salman AL-Kubaisi (Author)

431-449

PDF
fig 3

Manufacturing of Hybrid Aluminum Metal Matrix Composites Reinforced with SiC and Al₂O₃ : A Review

Haitham Mohammed Ibrahim Al-Zuhairi, Samir Ali Amin (Author)

450-473

PDF
fig 2

Phase Change Materials in Cooling Systems: A Sustainable Approach to Thermal Management

Hussein Jassim Akeiber (Author)

503-529

PDF
fig 4

Computational Fluid Dynamics Modeling of Air Conditioning Systems for Energy-Efficient Buildings

Hussein Jassim Akeiber (Author)

474-504

PDF
fig 2

Steel Tubes Filled by Concrete Under Flexural and Compression: A Review

Muhaned Hassan Fadhel, Wissam Kadhum Al-Saraj (Author)

530-555

PDF
fig 4

Impact of Elevated Temperatures on the Mechanical Properties of GFRP Bars in RC One-Way Slab: A Review

Akeel A. Jias, Abdul Qader Nihad Noori (Author)

569-584

PDF
fig 1

Understanding the Impact of Driver Behavior on Traffic Safety: A Comprehensive Review of Behavioral, Technological, and Environmental Factors

Omer Mohammed, hanan adil Khudhair (Author)

626-642

PDF
fig 1

Urban Development Strategies to Enhance Traffic Flow in the Al-Midan Area: A Review

Safa Salah Abood, Hanan Adil Khudhair (Author)

643-660

PDF
fig 7

Impact of Curing on Structural Performance of Reinforced Concrete members: A Comprehensive Review

Haider A. Altimimi, Ali Abd Sultan (Author)

661-673

PDF

Mechanical Engineering

fig 6

CFD simulations of Hybrid and Composite Nanomaterials for Enhanced HeatTransfer in Heat Exchangers

Hadeel Huseen, Hasan Ali Jurmut, Kadhim Fadhil Nasir (Author)

65-88

PDF

Chemical Engineering

fig 11

A numerical modelling using ADM1 model in the co-anaerobic digestion of food waste with varying fat fractions to generate biogas

Manar Amer Jebur, Zahra Pahlavan Yali (Author)

350-368

PDF
fig 3

Oxidation of phenol by CWPO method using nickel manganese oxidecatalyst prepared in glycerol solvent using microwave in batch reactor

Hadi Falah Hassan, Khaleel I. Hamad, Aysar T. Jarullah (Author)

396-409

PDF

Computer Engineering

fig 4

A comprehensive study of Cybercrime and Digital Forensics through Machine Learning and AI

Hussein Jassim Akeiber (Author)

369-395

PDF

Electrical Engineering

fig 19

Suppression of Common Mode Noise Caused by Unbalanced Return Currents of Redundant Power Lines

Barış Akıncı, Emre Kahraman2 (Author)

616-625

PDF

Materials Engineering

fig 3

Experimental Study on the Effect of Natural Oils Waste on Transformer Insulating Oils

Aya Falah Abdul Majeed (Author); Ahmed A. Ayash (Translator); Raouf M. Raouf (Author)

597-615

PDF

Environmental Engineering

fig 7

Water Quality Assessment of the Balu and Turag Rivers: A Case Study in Bangladesh

Tanjun Ashravi Ridoy, Saniul Haque Mahi (Author)

556-568

PDF
fig 8

Improving the mechanical properties of sandy soil using nano-organic carbon manufactured from corn plant residues

Rand R. Ahmed (Author)

585-596

PDF